↗MarginBirch
SHIPPING MATH · METRIC & IMPERIAL

Dimensional Weight Calculator

Calculate dimensional (volumetric) weight in kg or lb. Compare divisors 5000, 6000, 139 and 166 with actual package weight before carrier rounding.

100% free · no sign up

Enter your numbers

Choose cm and kg, or inches and lb. Enter measurements in the selected units; switching units does not convert your numbers.
Measure the packed box at its longest outside point.
Measure the outside width, including any bulges.
Measure the outside height of the sealed package.
Weigh the complete parcel, including the box and packing materials.
Your courier, route and service determine the correct divisor.
Unrounded billable weight
—
Actual weight—
Dimensional weight—
Package volume—
This is an unrounded weight estimate, not a courier quote. Check rounding rules with your carrier.

All calculations run locally in your browser. No account needed.

What is dimensional weight?

Courier services often price large, lightweight parcels by the space they occupy rather than only by the number on a scale. This calculated figure is called dimensional weight or volumetric weight.

Dimensional weight = length × width × height ÷ divisor. Use centimeters with a cm³/kg divisor such as 5000 or 6000, or inches with an in³/lb divisor such as 139 or 166. The correct divisor depends on the carrier and shipping service; there is no universal rate.

How to calculate dimensional weight in kg

Measure your packed parcel in centimeters and multiply its length, width and height. Divide that volume by the divisor specified for your service. For a 50 × 40 × 30 cm box, the volume is 60,000 cm³:

  • With divisor 5000: 60,000 ÷ 5000 = 12 kg.
  • With divisor 6000: 60,000 ÷ 6000 = 10 kg.

If the parcel actually weighs 8 kg, the higher weight is 12 kg or 10 kg respectively, before carrier rounding. A larger divisor gives a smaller dimensional weight for the same box; use the service's divisor rather than choosing the lower result.

Reduce DIM weight by comparing box sizes

A smaller packed box can reduce billable weight when dimensional weight exceeds scale weight. Keep the same units and divisor when comparing packaging.

  • 20 × 16 × 12 in box: 3,840 ÷ 139 = 27.63 lb dimensional weight. For an 18 lb parcel, unrounded billable weight is 27.63 lb.
  • 16 × 12 × 10 in box: 1,920 ÷ 139 = 13.81 lb dimensional weight. For the same 18 lb parcel, unrounded billable weight is 18 lb.

Changing the box reduces unrounded billable weight by about 9.63 lb in this example. Enter each box in the calculator to compare your packaging. Postage savings depend on carrier price bands, rounding and surcharges. Allow enough protective material to pack the item safely.

Dimensional weight in pounds: 139 vs 166

Choose inches and pounds, then enter your measurements again in those units. A 20 × 16 × 12 inch box has a volume of 3,840 in³:

  • With divisor 139: 3,840 ÷ 139 ≈ 27.63 lb.
  • With divisor 166: 3,840 ÷ 166 ≈ 23.13 lb.

For an actual weight of 18 lb, dimensional weight is higher in both examples. These are separate illustrative measurements, not an exact conversion of the centimeter example. The calculator displays the comparison before carrier-specific rounding.

Which divisor should I use?

The divisor depends on your carrier, service, country and rate agreement. For example, DHL's weight guidance describes 5000 for cm/kg and 139 for inches/lb. UPS US package guidance distinguishes 139 for Daily Rates and 166 for Retail Rates. UPS also describes a 6000 cm³/kg factor for international air freight. That freight factor is not a universal international parcel rule.

Confirm your own service's divisor and measurement rules before using the result to buy postage. The examples here do not automatically apply every carrier's thresholds, minimums or exceptions.

How to measure a package

  1. Pack and seal the parcel first. Measure the outside box at its widest points, including bulges.
  2. Enter all three dimensions in the same unit: centimeters or inches.
  3. Weigh the whole parcel, including packaging, in kilograms or pounds to match.
  4. Select your service's divisor and compare actual weight with dimensional weight.
  5. Apply the carrier's measurement, weight-rounding and minimum-charge rules separately.

This is a manual calculator: it does not scan a parcel or measure dimensions from a photo. Use a tape measure and scale to supply the inputs.

Actual, dimensional and billable weight

Actual weight is what the packed parcel weighs on a scale. Dimensional weight represents the space the box occupies. The result shown here is the greater of these two numbers, before carrier rounding. It is a planning estimate of billable weight, not a shipping price or final carrier invoice.

Can I use this for international shipments?

Yes, if your shipping service uses one of the supported divisors. Check the rules for that specific route and service; international shipping does not have one universal divisor. Customs charges and postage prices are outside this calculation.

How can a smaller box reduce dimensional weight?

At divisor 5000, reducing a box from 50 × 40 × 30 cm to 50 × 40 × 20 cm reduces dimensional weight from 12 kg to 8 kg. Keep enough protective packaging for the item. If actual weight is higher, a smaller box alone may not reduce the billable weight.

Does changing units convert my package measurements?

No. Re-enter the dimensions and actual weight in the selected units. The unit selector changes the available divisors and result units; it does not convert the numbers already entered.

How do I include postage in my selling profit?

Get a price from your carrier after checking the weight, then enter that shipping cost in the resale profit calculator. To work backwards from costs and a profit target, use the selling price calculator.

Shipping reference review: November 3, 2026. Marketplace rates and carrier rules can change. This calculator is informational and not a substitute for a seller statement, tax professional, or courier quote.